If you’re having trouble connecting to the internet on your Android device, it could be due to a number of issues. One common issue is that your device is unable to obtain an IP address from your router. This can be fixed by following a few simple steps.

If you’re having trouble connecting your device to a Wi-Fi network and seeing the “Failed to Obtain IP Address” error, there are a few potential fixes. First, try restarting your router and modem. If that doesn’t work, try Forgetting the Wi-Fi network on your device and then reconnecting. You can also try manually assigning an IP address to your device. If you’re still having trouble, there may be an issue with your Wi-Fi network itself.

What Causes the Error?

There are a few potential causes for this error. The most common is that your device is not able to obtain an IP address from the router. This can be due to a number of factors, including a bad connection, incorrect settings, or a problem with the router itself.

Another potential cause is that your device’s network adapter is not compatible with the router. This can often be the case with older devices that are not compatible with newer routers.

Finally, it is also possible that there is something wrong with the network itself. This could be due to a problem with the cable, the modem, or even the server.

How to Fix the Error?

If your computer is unable to obtain an IP address from a DHCP server, you may see the “Failed to obtain IP address” error. This error can be fixed by doing the following:

1. Check your network connection. Make sure that your computer is connected to the network and that the network is working properly.

2. If you are using a VPN, make sure that the VPN is properly configured and that you are connected to the correct VPN server.

3. Check your DHCP settings. Make sure that your computer is configured to obtain an IP address from a DHCP server.

4. Try releasing and renewing your IP address. To do this, open the Command Prompt and type “ipconfig /release” followed by “ipconfig /renew”. This will release your current IP address and obtain a new one from the DHCP server.

5. Try resetting your network adapter. To do this, open the Control Panel and go to “Network and Sharing Center”. Click on “Change adapter settings”. Right-click on your network adapter and select “Properties”. Click on the “Configure” button and go to the “Advanced” tab. Under the “Property” section, look for “IPv4 DNS servers”. Select the “Obtain DNS server address automatically” option and click “OK”.

If the above steps do not fix the error, you may need to contact your ISP or network administrator for further assistance.

Other Potential Solutions

If you are still having trouble connecting to a Wi-Fi network after trying the steps above, there are a few other potential solutions you can try.

First, try restarting your router. This will often times solve the problem, as it will reset the connection and clear any potential issues.

If restarting your router does not work, try resetting your network settings. This can be done by going to your device’s Settings, selecting “General,” then “Reset.” Once you have reset your network settings, try connecting to the Wi-Fi network again.

If you are still having trouble, you may need to contact your ISP or the manufacturer of your router for further assistance.

Conclusion

It is possible that your router is blocking the device from connecting to the network. Try power cycling the router and if that does not work, try resetting the router to factory settings. If neither of those work, then it is possible that the device itself is defective and you should consider taking it back to the store for a refund or exchange.

Further Reading

If you’re still having trouble obtaining an IP address after trying the tips in this article, you may want to check out the following resources for further reading:

How to Fix Wi-Fi Issues in Windows 10
How to Fix Obtaining IP Address Error on Android
How to Fix an IP Address Conflict

Fix: Failed to Obtain IP Address

Leave a Comment