If you’re having trouble with Windows Update KB4579311 causing Explorer to crash repeatedly when logging in, you’re not alone. Many users have been reporting the same issue, and Microsoft is aware of the problem. In the meantime, there are a few things you can do to fix the issue.
If you’re experiencing crashing issues after installing Windows Update KB4579311, you’re not alone. Several users have reported that their computers crash repeatedly after logging in, and that the only way to fix the problem is to uninstall the updates.
Microsoft is aware of the issue and is working on a fix, but in the meantime, there are a few things you can try to get things working again. In this article, we’ll walk you through a few troubleshooting steps that may help.
Table of Contents
What is the problem?
It seems that the Windows Update KB4579311 is causing Explorer to crash repeatedly when logging in. This is a problem because it makes it difficult to use your computer and access your files.
Section: How can I fix it?
There are a few things you can try to fix this problem.
First, try restarting your computer. This may fix the problem if it is caused by a temporary glitch.
If that doesn’t work, try uninstalling the update. To do this, go to the Control Panel, select “Add or Remove Programs,” and then find the update in the list of installed programs. Uninstall it and restart your computer.
If you’re still having trouble, you can try restoring your computer to a previous point before the update was installed. This will undo any changes that the update made, which may fix the problem. To do this, go to the Control Panel and select “System.” Then, click on the “System Restore” tab and follow the instructions on the screen.
If you’re having trouble with the Windows Update KB4579311 causing Explorer to crash, try restarting your computer, uninstalling the update, or restoring your computer to a previous point. Hopefully one of these solutions will fix the problem.
What is the cause?
There are a few possible causes for this issue:
1. A recent Windows update (KB4579311) is incompatible with your version of Windows.
2. Your graphics drivers are outdated or corrupt.
3. There is a conflict between certain programs and Windows Explorer.
4. Your computer is infected with malware.
5. There is a problem with the Windows Registry.
6. Your computer’s hard drive is failing.
7. There is a hardware problem with your computer.
8. Your computer is overheating.
9. You have a bad driver installed.
The most likely cause of your problem is that Windows Update KB4579311 is incompatible with your version of Windows. To fix this, you will need to uninstall the update.
If that does not solve the problem, then your next step should be to update your graphics drivers. You can do this by visiting the website of your graphics card manufacturer and downloading the latest drivers.
If updating your drivers does not fix the problem, then there is a good chance that there is a conflict between certain programs and Windows Explorer. To fix this, you will need to disable or uninstall the offending program.
If none of the above solutions solve the problem, then it is possible that your computer is infected with malware. You should run a virus scan with your antivirus program to see if this is the case.
If you are still having problems, then there may be a problem with the Windows Registry. You can try running a Registry cleaner program to fix this.
If your computer’s hard drive is failing, then you will need to replace it.
If you are still having problems, then there may be a hardware problem with your computer. You should contact a computer technician to diagnose the problem.
If your computer is overheating, then you will need to clean the vents and make sure that the fan is working properly.
How to fix it?
If you’re affected by this issue, there’s a relatively simple fix. Windows Update KB4579311 is creating a permissions issue with a specific registry key. To fix it, you’ll need to take ownership of the registry key and then edit the permissions to allow your account full control. Here’s how:
1. Press the Windows key + R to open the Run dialog box.
2. Type regedit and press Enter to open the Registry Editor.
3. In the Registry Editor, navigate to the following key:
4. Right-click the SideBySide key and select Permissions.
5. Click the Advanced button.
6. In the Advanced Security Settings window, click the Change link next to the Owner field.
7. In the Select User or Group window, type your username into the Enter the object name to select field and click the Check Names button.
8. Once your username has been resolved, click the OK button.
9. In the Advanced Security Settings window, you should now see your username listed as the owner of the SideBySide key. Click the OK button.
10. Back in the Permissions window, select your username from the list and check the Allow box next to Full Control.
11. Click the OK button to save the changes.
You should now be able to install Windows Update KB4579311 without any issues.
If you are experiencing issues with Windows Update KB4579311 causing Explorer to crash repeatedly, there are a few potential fixes. First, try resetting Windows Update by running the troubleshooter or running the “net stop wuauserv” and “net start wuauserv” commands in an elevated Command Prompt. If that does not work, try uninstalling the update altogether. Finally, if you are still experiencing issues, you can try a clean install of Windows 10.
If you’re encountering the Windows Update KB4579311 crashing your Explorer issue, there are a few things you can do to try and fix it.
First, make sure that you have all the latest updates installed for your Windows 10 system. You can do this by going to Start > Settings > Update & Security > Windows Update and checking for updates.
If there are any updates available, install them and then restart your computer. This may or may not fix the issue, but it’s worth a try.
If you’re still having issues, you can try resetting the Windows Update service. To do this, open the Start menu and search for “Services”. Find the “Windows Update” service in the list and right-click it. Select “Stop” from the context menu.
Once the service has been stopped, open the Start menu again and type “cmd” into the search bar. Right-click “Command Prompt” and select “Run as administrator”.
In the Command Prompt window, type the following command and press Enter:
net stop wuauserv
This will stop the Windows Update service. Now type the following command and press Enter:
net start wuauserv
This will start the Windows Update service again. Once the service has been restarted, try checking for updates again and see if the issue has been resolved.
If you’re still having issues, you can try resetting the Windows Update components. To do this, you’ll need to download the Windows Update Troubleshooter tool from Microsoft.
Once the tool has been downloaded, run it and follow the instructions on the screen. This will attempt to reset the Windows Update components and fix any issues that may be causing the crashing issue.
If you’re still encountering issues, you may need to perform a clean install of Windows 10. This will erase all your files, so make sure you have a backup before proceeding.
If you’re still having issues after following all of these steps, you may need to contact Microsoft support for further assistance.